如何选择跆拳道垫供应商：9项工厂核查清单

Is your mat supplier really a factory, or a trading desk with a sample room? Here is the nine-point checklist we hand to buyers comparing a taekwondo mat supplier, plus the three spec figures that decide whether a floor lasts ten seasons or two.

Ask for the inspection, not the brochure. A real factory photographs your batch on the bench: thickness gauge, density record, edge fit, carton count.

What a Taekwondo Mat Supplier Should Prove Before You Order

Taekwondo mat suppliers fall into three groups: trading companies that re-sell whatever the local market offers, workshops that mould tiles but buy everything else in, and integrated factories that compound their own 舱外活动, laminate the wear layer and cut cartons on site. All three quote a price; only one holds the same colour, density and edge fit on a repeat order a year later.

So skip the price list and put four questions to every taekwondo mat supplier on the shortlist: who compounds the foam, how thickness is controlled, what happens when a tile does not fit, and who signs the loading plan.

The Nine-Point Mat Factory Audit Checklist

Work through these with any taekwondo mat supplier; the ones who answer in writing are the ones you scale with.

1. Factory or trader. Ask for the workshop address, a video walk-through and the mould list – a trader cannot show you the press.

2. Raw material. Virgin EVA against regrind shows in rebound, smell and colour drift; ask for density and Shore C data.

3. Thickness. Floors run 20-40 mm; ask for the tolerance in writing and a cross-section photo of your batch.

4. Edge geometry. Press two samples together and lift one; a loose interlock becomes a trip line by spring.

5. Surface. Embossed tatami faces must repeat across the pallet; patchy texture means a worn mould.

6. Quality control. Batch records, pre-shipment photos and a named QC contact, not a promise of “high quality”.

7. Compliance. Phthalate and heavy-metal reports, REACH and EN 71-3 statements, plus school-board requirements.

8. MOQ and loading. A supplier who cannot draw your container cannot protect your freight.

9. Spares. Edge trim, spare tiles and colour continuity are why clubs reorder rather than re-tender.

EVA Mat Specifications: Density, Thickness and Hardness

Three numbers do most of the work when you compare quotes.

Thickness. 20 mm for warm-up and kids zones, 25-30 mm for the mainstream sparring hall, 40 mm where throws land – see the EVA martial arts mat range.

密度。. Mat-grade EVA sits between 100 and 180 kg/m3; denser foam costs more per tile and lasts visibly longer.

Shore C hardness. Training floors usually run 30-45 Shore C – soft enough to absorb a landing, firm enough that athletes do not sink. Competition venues fix surfaces by regulation: check the World Taekwondo equipment requirements for your event.

Stock depth decides your delivery date. Standard colours and thicknesses held in Qingdao ship in a mixed container – no mould-change queue.

Tatami Tiles, Interlocking Edges and Dojo Layout

Thickness is the easy part; geometry is where layouts get expensive. The club standard is a 100 x 100 cm four-way interlocking EVA榻榻米垫 for kata and competition areas, a 60 x 60 cm 互锁式泡沫垫 for multi-use halls, and 30 x 30 cm EVA拼图地垫 for the under-8 room and edge cuts.

Order trim and corner pieces with the pallet: a raw tile edge is a tripping hazard within a month, and a taekwondo mat supplier who quotes mats without trim has not read your drawing.

Where one hall hosts taekwondo and boxing, keep one thickness and put heavy bags on a separate 橡胶健身房地垫 island.

MOQ, Cartons and Container Loading for Mat Orders

Stock colours and sizes can be quoted from a few hundred square metres; new moulds, printed wear layers and private-label cartons need a full run, because set-up rather than material drives that cost.

Ask four things before signing: carton dimension and gross weight, corner protection, pallet stacking height, and the loading plan – capacity swings widely with thickness and carton size, and a taekwondo mat supplier who guesses it hands your freight budget to a forwarder.

一个集装箱，一个计划。. Mats are palletised at the door end; cartons of guards, uniforms and shoes load behind.

OEM Colour, Print and Private Label for Club Brands

Customisation is what keeps an account: Pantone-matched tile colours, two-tone layouts marking out a competition area, embossed or printed wear layers, club logos and branded cartons for distributors.

Clubs also kit out fighters at the same time, and one factory can quote it all: a WT taekwondo sparring gear set, a complete gear set, a head guard, hand and foot guards, a WT-approved groin guard, an ITF sparring gear set, a WT dobok 和 跆拳道鞋.

A finished hall is a system: one emboss pattern, one thickness, consistent colour and an edge trim that survives the door threshold.

FAQ: Choosing a Taekwondo Mat Supplier

What is the MOQ for a taekwondo mat order?

A few hundred square metres for stock colours; new moulds or private-label packaging need a full run.

Which thickness should a training hall order?

25-30 mm for a competition-style hall, 20 mm for warm-up and kids areas, 40 mm wherever throws land.

How long does production and shipping take?

Stock sizes leave Qingdao in two to three weeks; sea freight runs four to six weeks.

Can mats ship with sparring gear and uniforms?

Yes – mats are palletised first and cartons load behind: head guards, groin protectors, doboks and a 空手道格斗装备套装.

Do you supply OEM mats for distributors?

Yes – Pantone colour matching, custom tile sizes, printed wear layers and private-label cartons from our presses in Qingdao.

Price tells you what a quote costs today; the nine-point audit tells you what the floor costs over five seasons. Run the checklist on your taekwondo mat supplier shortlist, then buy from the factory that moulded the tiles.